TORX PLUS® Variations

TAMPER-RESISTANT TORX PLUS® drive

·  Tamper-resistant TORX PLUS® recess has five lobes instead of six and a solid post formed in the center of the recess. It’s available for screw diameter over M2.5.

·  Tamper-resistant TORX PLUS® bits are under controlled distribution, available only through license screw manufacturers, thus removal is made only by authorized personnel.

·  Even destroying the solid post, it’s not possible to remove the screw without the special Tamper resistant TORX PLUS® bit.

TORX PLUS® Tamper resistant

EXTERNAL TORX PLUS® DRIVE SYSTEM

·  Designed with the same elliptical configuration than TORX PLUS®, this version allows the highest torque transmission available.

·  TORX PLUS® sockets are required for installation and removal, as TORX® sockets are not compatible.

TORX PLUS® External

EXTERNAL TORX PLUS® low-profile head

·  This version provides higher torque transmission than corresponding internal recesses. Head height similar to pan or indented hex head but lower weight.

·  The optimized design minimizes the required space to accommodate head and reduces tool socket wear. It requires special sockets for installation and removal.

TORX PLUS® External Low Profile

TORX PLUS® STEM

·  An external TORX PLUS® configuration, extruded onto one end of the double-end stud, simplifies driving. The improved torsional strength enhances the clamping of the parts.

TORX PLUS® STEM

TORX PLUS® MAXX

·  TORX PLUS® MAXX is an improvement of TORX PLUS® STEM which allows for a higher assembly torque.

·  This new version eliminates the transition area from the recess to the thread, increasing the breaking torque.

·  It requires special sockets for installation and removal.

TORX PLUS® MAXX