REMFORM® II HS™ Zinc plated screw, Pan head TORX PLUS® AUTOSERT®

The best in its class for highly demanding plastic assemblies.

REMFORM® II HS™ Zinc plated screw, Pan head TORX PLUS® AUTOSERT®
REMFORM® II HS™ Zinc plated screw, Pan head TORX PLUS® AUTOSERT®

Product overview

REMFORM® II HS™ (High Strength) screws have been developed for the direct assembly of thermoplastics in applications with high mechanical requirements.

The improved thread design results in a more resistant, safe and optimized assembly of fiber reinforced thermoplastics, offering high clamping force, pull-out and vibration loosening resistance.

Apart from the references available in stock, we produce customised screws to fit your exact requirements.

Samples
3D CAD Files
Quotation

List of references

Filters
Screw diameter (mm)
3.0
2.5
2.0
1.8
3.5
4.0
5.0
Close
Screw length L (mm)
6
8
10
12
16
20
Close
Head diameter D (mm)
5.30
4.30
3.40
3.20
6.20
7.00
9.00
Close
Recess
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 8 IP
TORX PLUS® AUTOSERT® 6 IP
TORX PLUS® AUTOSERT® 5 IP
TORX PLUS® AUTOSERT® 15 IP
TORX PLUS® AUTOSERT® 20 IP
TORX PLUS® AUTOSERT® 25 IP
Close
Reference
J
d
36HS81PA
258HS81PA
28HS81PA
186HS81PA
38HS81PA
310HS81PA
312HS81PA
316HS81PA
320HS81PA
358HS81PA
3510HS81PA
3512HS81PA
3516HS81PA
48HS81PA
410HS81PA
412HS81PA
416HS81PA
420HS81PA
512HS81PA
520HS81PA
Screw diameter (mm)
J
d
3.0
2.5
2.0
1.8
3.0
3.0
3.0
3.0
3.0
3.5
3.5
3.5
3.5
4.0
4.0
4.0
4.0
4.0
5.0
5.0
Screw length L (mm)
J
d
6
8
8
6
8
10
12
16
20
8
10
12
16
8
10
12
16
20
12
20
Head diameter D (mm)
J
d
5.30
4.30
3.40
3.20
5.30
5.30
5.30
5.30
5.30
6.20
6.20
6.20
6.20
7.00
7.00
7.00
7.00
7.00
9.00
9.00
Recess
J
d
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 8 IP
TORX PLUS® AUTOSERT® 6 IP
TORX PLUS® AUTOSERT® 5 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 15 IP
TORX PLUS® AUTOSERT® 15 IP
TORX PLUS® AUTOSERT® 15 IP
TORX PLUS® AUTOSERT® 15 IP
TORX PLUS® AUTOSERT® 20 IP
TORX PLUS® AUTOSERT® 20 IP
TORX PLUS® AUTOSERT® 20 IP
TORX PLUS® AUTOSERT® 20 IP
TORX PLUS® AUTOSERT® 20 IP
TORX PLUS® AUTOSERT® 25 IP
TORX PLUS® AUTOSERT® 25 IP
20 / 20 references are shown

Hole parameters calculator

In order to ensure a safe installation and stable clamping force, it's relevant to pay attention to the boss design. The recommended dimensions for core hole diameter and length of engagement are available at Design Guidelines. Go to Design Guidelines
https://www.celofasteners.com/img/cms/category-products/plastic/boss-design-plastic.jpg

Applications

REMFORM® II HS™ screws are recommended for assemblies on high strength or fiber-reinforced materials that require: High assembly torque, either with hard plastics or very deep assemblies. High clamping force. High pull-out resistance. High resistance to vibration loosening.

Do you have any questions about this product?

Request more info